View In:   ArcGIS Online Map Viewer

Name: Sewer Manhole

Display Field: RoadName

Type: Feature Layer

Geometry Type: esriGeometryPoint

Description: This is a layer of all wastewater manholes. May include some other buried structures.Fields:ObjectID - Unique ID assigned by softwareSBManholeID - Unique ID assigned by city staff. These typically begin wtih SMH (Sewer Man Hole) and a 4 digit number.Location - A general description of where the structure is located (i.e. in a road, greenbelt, parking lot, sidewalk, etc).AccessDiamIn - The diameter of the manhole access measured in inches.Material_Riser - The material that the manhole riser is constructed out of (e.g. precast concrete, brick, etc).Material_Chimney - The material that the manhole chimney (typically the top section) is constructed out of (e.g. precast concrete, brick, etc)Sewer Basics: Parts of a ManholeMaterial_Cone - The material that the manhole cone is constructed out of (e.g. precast concrete, brick, etc). This is the manhole section that "necks down" the diameter of the structure between the riser and the chimney.Material_Barrel - The material that the manhole barrel is constructed out of (e.g. precast concrete, brick, etc). This is the manhole section that typically sits on the base.Material_Bench - The material that the manhole bench is constructed out of (e.g. precast concrete, brick, etc). This is the bottom section of the manhole where the invert or channel is located.SewerShed - The sewershed in which the manhole is located. This is based on which treatment facility wastewater flowing through the structure ultimately leads to. PumpStaShed - Which pump station sewershed does wastewater flow to. Each pump station is given a unique ID and those are listed here. If it goes from one pump station into another both should be listed.Access - ?Ladder - Is there a ladder leading down into the manhole.InvertDepth_In - Field measurement from the rim to the bottom of the invert. This is measured in inches.RoadName - The road where the manhole is located. If not in a road, the nearest road is listed.Elevation_Invert - The elevation of the manhole invert. This is either taken from as-built plans or measured with a GPS with sufficient accuracy.Elevation_Rim - The elevation of the manhole rim or cover. This is either taken from as-built plans or measured with a GPS with sufficient accuracy.InstallYear - The year that the manhole was installed. Source1 - Where did the information included in the fields come from? As built plans? Field inspection? Other?Source2 - Was a second source of information used to fill in the fields? If so, identify it in this field. Comments - Any comments.created_user - The GIS user that created the point.created_date - The date on which the point was created.last_edited_user - The GIS user that last edited the point.last_edited_date - The date when the point was last updated.GlobalID - Unique ID assigned by software.Ownership - The entity that owns the manhole and is responsible for maintenance. If on private property indicate "private". This does not require the private property owner's name.

Service Item Id: 15e05ba0d36a48878e72f577ff520790

Copyright Text:

Default Visibility: true

MaxRecordCount: 20000

MaxSelectionCount: 0

Supported Query Formats: JSON, geoJSON, PBF

Min Scale: 0.0

Max Scale: 0.0

Supports Advanced Queries: true

Supports Statistics: true

Can Scale Symbols: false

Use Standardized Queries: true

Supports ValidateSQL: true

Supports Calculate: true

Supports Datum Transformation: true

Extent:

XMin: 442544.06489999965
YMin: 212786.27710000053
XMax: 449255.0569000002
YMax: 221108.30760000087
Spatial Reference: 32145  (32145)  LatestVCSWkid(0)

Drawing Info:

Renderer:
Simple Renderer:
Symbol:
Label: N/A
Description: N/A
Transparency: 0
Labeling Info:

Feature Draw Order:

N/A

Advanced Query Capabilities:

Supports Statistics: true
Supports OrderBy: true
Supports Distinct: true
Supports Pagination: true
Supports TrueCurve: false
Supports Returning Query Extent: true
Supports Query With Distance: true
Supports Sql Expression: true
Supports Query With ResultType: true
Supports Returning Geometry Centroid: false
Supports Binning LOD: false
Supports Query With LOD Spatial Reference: false
Supports Percentile Statistics: true
Supports Having Clause: true
Supports Count Distinct: true
Supports Time Relation: false
Supports Sql Format: false
Supports Query Analytic: true
Supports Query With Current User: true

HasZ: false

HasM: false

Has Attachments: false

HTML Popup Type: esriServerHTMLPopupTypeAsHTMLText

Type ID Field:

Fields:

• OBJECTID ( type: esriFieldTypeOID, alias: OBJECTID, editable: false, nullable: false, defaultValue: null, modelName: OBJECTID )
• SBManholeID ( type: esriFieldTypeString, alias: SBManholeID, editable: true, nullable: true, length: 10, defaultValue: null, modelName: SBManholeID )
• Location ( type: esriFieldTypeString, alias: Location, editable: true, nullable: true, length: 25, defaultValue: null, modelName: Location , Coded Values: [Road: Road] , [Parking Lot: Parking Lot] , [Greenbelt: Greenbelt] , ...4 more... )
• AccessDiamIn ( type: esriFieldTypeSmallInteger, alias: AccessDiam (inches), editable: true, nullable: true, defaultValue: null, modelName: AccessDiamIn )
• Material_Riser ( type: esriFieldTypeString, alias: Riser Material, editable: true, nullable: true, length: 25, defaultValue: null, modelName: Material_Riser , Coded Values: [Brick: Brick] , [Precast: Precast] , [Concrete: Concrete] , ...2 more... )
• Material_Chimney ( type: esriFieldTypeString, alias: Chimney Material, editable: true, nullable: true, length: 25, defaultValue: null, modelName: Material_Chimney , Coded Values: [Brick: Brick] , [Precast: Precast] , [Concrete: Concrete] , ...2 more... )
• Material_Cone ( type: esriFieldTypeString, alias: Cone Material, editable: true, nullable: true, length: 25, defaultValue: null, modelName: Material_Cone , Coded Values: [Brick: Brick] , [Precast: Precast] , [Concrete: Concrete] , ...2 more... )
• Material_Barrel ( type: esriFieldTypeString, alias: Barrel Material, editable: true, nullable: true, length: 25, defaultValue: null, modelName: Material_Barrel , Coded Values: [Brick: Brick] , [Precast: Precast] , [Concrete: Concrete] , ...2 more... )
• Material_Bench ( type: esriFieldTypeString, alias: Bench Material, editable: true, nullable: true, length: 25, defaultValue: null, modelName: Material_Bench )
• SewerShed ( type: esriFieldTypeString, alias: Sewer Shed, editable: true, nullable: true, length: 25, defaultValue: null, modelName: SewerShed , Coded Values: [Bartlett Bay: Bartlett Bay] , [Ariport Parkway: Airport Parkway] , [Burlington: Burlington] )
• PumpStaShed ( type: esriFieldTypeString, alias: Pump Station Sewer Shed, editable: true, nullable: true, length: 50, defaultValue: null, modelName: PumpStaShed )
• Access ( type: esriFieldTypeString, alias: Access, editable: true, nullable: true, length: 50, defaultValue: null, modelName: Access , Coded Values: [Brick: Brick] , [Precast: Precast] , [Concrete: Concrete] , ...2 more... )
• Ladder ( type: esriFieldTypeString, alias: Ladder, editable: true, nullable: true, length: 5, defaultValue: null, modelName: Ladder , Coded Values: [Yes: Yes] , [No: No] , [NA: NA] )
• InvertDepth_In ( type: esriFieldTypeString, alias: Invert Depth (inches), editable: true, nullable: true, length: 50, defaultValue: null, modelName: InvertDepth_In )
• RoadName ( type: esriFieldTypeString, alias: Road Name, editable: true, nullable: true, length: 50, defaultValue: null, modelName: RoadName )
• Elevation_Invert ( type: esriFieldTypeDouble, alias: Elevation of Invert, editable: true, nullable: true, defaultValue: null, modelName: Elevation_Invert )
• Elevation_Rim ( type: esriFieldTypeDouble, alias: Elevation of Rim, editable: true, nullable: true, defaultValue: null, modelName: Elevation_Rim )
• InstallYear ( type: esriFieldTypeString, alias: Install Year, editable: true, nullable: true, length: 10, defaultValue: null, modelName: InstallYear )
• Source1 ( type: esriFieldTypeString, alias: Source1, editable: true, nullable: true, length: 50, defaultValue: null, modelName: Source1 , Coded Values: [Field Inspection: Field Inspection] , [Ortho Photo: Ortho Photo] , [Site Plans: Site Plans] , ...2 more... )
• Source2 ( type: esriFieldTypeString, alias: Source2, editable: true, nullable: true, length: 50, defaultValue: null, modelName: Source2 , Coded Values: [Field Inspection: Field Inspection] , [Ortho Photo: Ortho Photo] , [Site Plans: Site Plans] , ...2 more... )
• Comments ( type: esriFieldTypeString, alias: Comments, editable: true, nullable: true, length: 50, defaultValue: null, modelName: Comments )
• created_user ( type: esriFieldTypeString, alias: created_user, editable: false, nullable: true, length: 255, defaultValue: null, modelName: created_user )
• created_date ( type: esriFieldTypeDate, alias: created_date, editable: false, nullable: true, length: 8, defaultValue: null, modelName: created_date )
• last_edited_user ( type: esriFieldTypeString, alias: last_edited_user, editable: false, nullable: true, length: 255, defaultValue: null, modelName: last_edited_user )
• last_edited_date ( type: esriFieldTypeDate, alias: last_edited_date, editable: false, nullable: true, length: 8, defaultValue: null, modelName: last_edited_date )
• GlobalID ( type: esriFieldTypeGlobalID, alias: GlobalID, editable: false, nullable: false, length: 38, defaultValue: null, modelName: GlobalID )
• Ownership ( type: esriFieldTypeString, alias: Ownership, editable: true, nullable: true, length: 25, defaultValue: null, modelName: Ownership , Coded Values: [BTV Airport: BTV Airport] , [Other: Other] , [Private: Private] , ...8 more... )

Templates:

• Name: Sewer Manhole
  Description:
  Prototype:
  Ownership: null
  Comments: null
  SBManholeID: null
  Location: null
  AccessDiamIn: null
  Material_Riser: null
  Material_Chimney: null
  Material_Cone: null
  Material_Barrel: null
  Material_Bench: null
  SewerShed: null
  PumpStaShed: null
  Access: null
  Ladder: null
  InvertDepth_In: null
  RoadName: null
  Elevation_Invert: null
  Elevation_Rim: null
  InstallYear: null
  Source1: null
  Source2: null
  
  Drawing Tool: esriFeatureEditToolPoint

Capabilities: Query,Extract

Sync Can Return Changes: false

Is Data Versioned: false

Supports Rollback On Failure: false

Supports ApplyEdits With Global Ids: true

Edit Fields Info:

• Creation Date Field: created_date
• Creator Field: created_user
• Edit Date Field: last_edited_date
• Editor Field: last_edited_user

Supports Query With Historic Moment: false

Supports Coordinates Quantization: true

Child Resources:

Supported Operations:   Query   Query Analytic   Append   Validate SQL   Generate Renderer   Return Updates   Iteminfo   Thumbnail   Metadata